Embedded solar road stud 128*50mm SRD-614

Model: SRD-614 Specifications: D128*H50mm Material: Die-cast aluminum housing + imported transparent PC Description: After installation, it can withstand vehicle pressure and static pressure of approximately 25 tons. It is parallel to the ground and can be used in road center lines or pedestrian crosswalks, etc. Solar powered, no need to lay ground wires, and the inner core can be quickly replaced during maintenance; It can be used in road center lines or pedestrian crosswalks, with a static pressure resistance of about 25 tons, and the inner core can be quickly replaced during maintenance.

Embedded solar buried lamp SRD-613-1

Cast aluminum embedded solar road studs Model: SRD-613-1 Specifications: D143*H50mm Material: Die-cast aluminum housing + imported transparent PC Description: After installation, it can be driven over by vehicles, with a static compressive strength of about 35 tons. It is parallel to the ground and can be used in road center lines or pedestrian crosswalks, etc. Solar power supply, no need to lay ground wires, the inner core can be quickly replaced during maintenance; Can be used in road center lines or pedestrian crosswalks, with a static compressive strength of about 35 tons, and the inner core can be quickly replaced during maintenance.

Spiked solar road stud SRD-602

Cast Aluminum Recessed Solar Road Stud Model: SRD-602 Specifications: 130*118*77mm Material: Die-cast aluminum housing + PC skylight and reflective lens Introduction: This product is a cast aluminum solar road stud with a nail foot. It is installed along the road surface and is used to indicate the direction of travel at night or in rainy and foggy weather. It consists of retroreflective materials, a shell, a solar panel, an LED, and a controller. It is a visual guidance facility with active light emission and passive reflection performance, and is usually used in conjunction with markings.

Spiked solar raised pavement marker SRD-602-1

Cast Aluminum Recessed Solar Road Stud Model: SRD-602-01 Specifications: 130*118*77mm Material: Die-cast aluminum housing + PC skylight and reflective lens Introduction: This product is an upgraded version of the semi-recessed raised solar road stud with a nail foot. The aluminum lamp body is integrally formed, with strong compressive strength and stable installation with holes. The product uses a built-in reflective lens, double-sided light emission, and IP68 waterproof rating. The rectangular size is 127*113*77MM, which is one of the classic styles in the solar road stud series.

Round solar pearl plastic stud SRD-603

Paste-type solar road studs Model: SRD-603 Specifications: Dia114*24.5mm Material: Vibration-resistant PC+glue Introduction: This product is a round plastic PC shell solar deck light, using an intelligent light control system: it charges during the day and automatically turns on at night. The product also features a long working time, waterproof and pressure-resistant, no wiring required, easy installation, and double-sided or four-sided light emission.

Quadruple-sided solar powered warning bollard light SRD-603-1

Paste-type solar road studs Model: SRD-603-1 Specifications: Dia114*24.5mm Material: Transparent bulletproof PC Introduction: This product is a 360-degree multi-faceted light-emitting, paste-type protruding solar road stud light. The shell is made of one-piece molded polyphosphate transparent PC. IP68 waterproof rating. The product is easy to install, simply mix AB glue or nail it. Diameter 114mm * height 24.5mm. Suitable for installation in places with less vehicle traffic and no large vehicles, and also used for warning lights on fishing boats, fish cages, and roads.

Horseshoe solar stud deck light SRD-601

Paste-type solar road studs Model: SRD-601 Specifications: 107*96*223mm Material: Die-cast aluminum + PC Introduction: This product is also known as a horseshoe-shaped solar road stud or elliptical deck light. It charges during the day and automatically lights up at night. The product features a long working time, good waterproof performance, simple installation, double-sided light emission, and a metal shell. The elliptical size is one of the classic styles in the solar deck light series.

Recessed solar cat eye stud SRD-611

Name: Solar Road Stud Model: SRD-611 Specifications: ￠100*48mm Material: Fully tempered glass Compressive Strength: Static compressive strength of approximately 20 tons Introduction: After installation, it is parallel to the ground; used in urban roads, foggy areas, road islands, vehicle diversion areas, toll station lanes; accident-prone areas, etc. It can automatically light up at night and on rainy days to provide active safety driving guidance for vehicles or pedestrians