Quadruple-sided solar powered warning bollard light SRD-603-1
Paste-type solar road studs Model: SRD-603-1 Specifications: Dia114*24.5mm Material: Transparent bulletproof PC Introduction: This product is a 360-degree multi-faceted light-emitting, paste-type protruding solar road stud light. The shell is made of one-piece molded polyphosphate transparent PC. IP68 waterproof rating. The product is easy to install, simply mix AB glue or nail it. Diameter 114mm * height 24.5mm. Suitable for installation in places with less vehicle traffic and no large vehicles, and also used for warning lights on fishing boats, fish cages, and roads.
Keywords:
SROADA
Working principle of solar lights
Solar lights utilize the photovoltaic effect of solar energy to convert solar energy into electrical energy. This electrical energy is then stored in a battery via a control system. At night and in low-light conditions such as foggy or rainy weather, the lights automatically illuminate, effectively guiding vehicles in the correct direction, ensuring traffic safety, and providing landscape lighting.
Application Scenarios:
1. Road edge stones;
2. Foggy areas (seaside, waterways, etc.);
3. Guide line positions at the entrance and exit of overpasses and tunnels;
4. Road islands, vehicle diversion areas (around the perimeter of triangular areas);
5. Railway ramp entrances;
6. On toll booth lanes;
7. Accident-prone areas;
8. City sidewalks, park paths, and other areas requiring landscape lighting at night;
9. Also suitable for parks, bridges, scenic areas, cultural squares, wall decoration, mountain trails, community landscaping, villa courtyards, and homestay areas for outdoor landscape lighting.
Product Parameters |
1. Power supply: Solar panel (monocrystalline silicon) 2.5V/120mA
2. Energy storage device: Ni-MH 1.2V/800mAh
3. Working time: Under standard light intensity, flashing lights can work continuously for 24 hours after one day of charging, and constant lights for 12 hours; fully charged constant light for 48 hours, flashing can work for more than 72 hours
4. Display mode: Flashing or constant light
5. Display color: White, yellow, red, green, blue optional
6. Display device: 8~10pcs 5MM ultra-high brightness LEDs
7. Visible distance: Approximately 500 meters
8. Service life: Approximately 3-5 years
9. Operating environment: -20℃～+60℃
10. Shell material: Bulletproof and vibration-resistant PC+epoxy
11. Dimensions: Diameter 114*H24.5mm, single weight approximately 260g
12. Waterproof rating: IP68
13. Packaging size: 38*29.5*25CM, 60PCS/carton, net weight: 15.6KG/carton, gross weight: 17KG/carton,
Installation Method |
1. Positioning: First, set up safety warning facilities. Use a ruler to determine the installation location, ensuring that each position is vertically aligned. The installation distance should conform to design requirements. The installation area must be flat, dry, and clean (remove sand, dust, marking paint, etc. If there are markings, clean the markings at the installation location), and seamless (fill any gaps with glue).
2. Mixing glue: Use dedicated A glue and dedicated B glue for studs. The ratio of A glue to B glue is 1:1 (e.g., 1 kg of A glue, 1 kg of B glue). The glue must be mixed thoroughly until the color is uniform.
3. Applying glue: Clean the road surface before installation. Use an appropriate amount of glue, ensuring it adheres to both the stud and the ground without excessive overflow. Approximately 50 grams of glue is needed per stud. Apply the glue evenly to the bottom of the road marker, place it on the ground, rotate it so that the LED light reflector faces oncoming traffic, and then gently tap the top of the stud with a rubber hammer to ensure it is flat.
4. Inspection: Check the installed studs after two hours.
5. Road closure: It is recommended to close the road for 6 hours to ensure the glue cures properly.
Product Application Images |
SRD-312 Solar Landscape Light Installation Case
SRD-312 Solar Landscape Light Installation Case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD801 warning light installation case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD-306 lamp installation case in Singapore
Product Center
PRODUCTS CENTER
Recommended
Information
Contact Us
Company Address: Building D, 4F, Gem Science and Technology Park, Gemstone Road, Shiyan Street, Bao'an District, Shenzhen
Working principle of solar lights
Solar lights utilize the photovoltaic effect of solar energy to convert solar energy into electrical energy. This electrical energy is then stored in a battery via a control system. At night and in low-light conditions such as foggy or rainy weather, the lights automatically illuminate, effectively guiding vehicles in the correct direction, ensuring traffic safety, and providing landscape lighting.
Application Scenarios:
1. Road edge stones;
2. Foggy areas (seaside, waterways, etc.);
3. Guide line positions at the entrance and exit of overpasses and tunnels;
4. Road islands, vehicle diversion areas (around the perimeter of triangular areas);
5. Railway ramp entrances;
6. On toll booth lanes;
7. Accident-prone areas;
8. City sidewalks, park paths, and other areas requiring landscape lighting at night;
9. Also suitable for parks, bridges, scenic areas, cultural squares, wall decoration, mountain trails, community landscaping, villa courtyards, and homestay areas for outdoor landscape lighting.
Product Parameters |
1. Power supply: Solar panel (monocrystalline silicon) 2.5V/120mA
2. Energy storage device: Ni-MH 1.2V/800mAh
3. Working time: Under standard light intensity, flashing lights can work continuously for 24 hours after one day of charging, and constant lights for 12 hours; fully charged constant light for 48 hours, flashing can work for more than 72 hours
4. Display mode: Flashing or constant light
5. Display color: White, yellow, red, green, blue optional
6. Display device: 8~10pcs 5MM ultra-high brightness LEDs
7. Visible distance: Approximately 500 meters
8. Service life: Approximately 3-5 years
9. Operating environment: -20℃～+60℃
10. Shell material: Bulletproof and vibration-resistant PC+epoxy
11. Dimensions: Diameter 114*H24.5mm, single weight approximately 260g
12. Waterproof rating: IP68
13. Packaging size: 38*29.5*25CM, 60PCS/carton, net weight: 15.6KG/carton, gross weight: 17KG/carton,
Installation Method |
1. Positioning: First, set up safety warning facilities. Use a ruler to determine the installation location, ensuring that each position is vertically aligned. The installation distance should conform to design requirements. The installation area must be flat, dry, and clean (remove sand, dust, marking paint, etc. If there are markings, clean the markings at the installation location), and seamless (fill any gaps with glue).
2. Mixing glue: Use dedicated A glue and dedicated B glue for studs. The ratio of A glue to B glue is 1:1 (e.g., 1 kg of A glue, 1 kg of B glue). The glue must be mixed thoroughly until the color is uniform.
3. Applying glue: Clean the road surface before installation. Use an appropriate amount of glue, ensuring it adheres to both the stud and the ground without excessive overflow. Approximately 50 grams of glue is needed per stud. Apply the glue evenly to the bottom of the road marker, place it on the ground, rotate it so that the LED light reflector faces oncoming traffic, and then gently tap the top of the stud with a rubber hammer to ensure it is flat.
4. Inspection: Check the installed studs after two hours.
5. Road closure: It is recommended to close the road for 6 hours to ensure the glue cures properly.
Product Application Images |
SRD-312 Solar Landscape Light Installation Case
SRD-312 Solar Landscape Light Installation Case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD801 warning light installation case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD-306 lamp installation case in Singapore
Leave a Message
If you are interested in our products and want to learn more, please leave a message here, and we will reply to you as soon as possible.
Company Address: Building D, 4F, Gem Science and Technology Park, Gemstone Road, Shiyan Street, Bao'an District, Shenzhen
Cooperation Consultation:
Mr. Zhong
Mr. Zhong
WhatsApp：8613530665818
Skype：Support@sroada.com
Mr. Zhong：+86 13530665818
Mr. Zhong：+86 18675508970
Business1：Sales01@sroada.com
Business 2：Sales02@sroada.com
Support：Support@sroada.com
QQ：691351563