The solar-powered airport taxiway edge light SRD-802 utilizes photovoltaic effects to convert solar energy into electricity, which is then stored in a battery via a control system. When sunlight weakens in the evening or on cloudy/rainy days, the control system automatically activates the LED lights for warning and landscape lighting purposes. It automatically shuts off at dawn. —Widely used in inland waterways, ship navigation, high-rise buildings, communication towers, wind turbine cranes, power plant chimneys, offshore bridges, and airport perimeter facilities as navigational aids, serving as both night-time aviation obstacle markers and enhancing nighttime aesthetics.

Under what circumstances is it suitable to choose and install solar-powered airport approach lights? A The airport does not have night flight operations every day;

B It is inconvenient to lay cables on the airport runway, or there is no electricity available;

C Airport renovation or temporary airport.

Product Selling Points

A: Novel style, custom-designed product;

B: Solar panels on the top and sides provide multi-directional charging;

C: Small size and light weight, only 5KG;

D: Battery life up to more than 5 years;

E: Battery can be easily replaced;

F: Waterproof rating of IP67.

1. The light source is LED, using imported internationally advanced long-life, low-power, high-efficiency chip packaging.

2. Uses low-illumination, high-efficiency solar panels, with solar-dedicated storage batteries as the power source.

3. The control circuit uses a micro-power strobe light controller, reducing the energy consumption of the control circuit itself and significantly improving product reliability.

4. The storage battery uses an advanced power management system, providing comprehensive protection against battery undervoltage, overvoltage, and float charging, effectively extending battery life.

5. Uses conventional high-capacity, long-life lithium-ion batteries, with a design for easy replacement.

6. The lampshade is made of PC material, with excellent impact resistance, thermal stability, and gloss.

7. The housing is made of steel, with a powder-coated surface, making it sturdy, durable, and corrosion-resistant.

8. Photoelectric automatic control function: the light is off during the day and automatically turns on at night or on cloudy/rainy days.

9. Continuous operating time on cloudy/rainy days: ≥140 hours

10. Sealing material: waterproof sealing ring, waterproof rating IP68

11. Light weight, only 5KG.

1. Power supply: Solar panel (monocrystalline silicon) 5V/8W

2. Energy storage device: Lithium battery 3.7V/12Ah

3. Working time: ≥140 hours on cloudy/rainy days

4. Display mode: Common flashing. Intelligent light control system + manual button switch

5. LED color: Red, yellow, white, green, blue

6. Display device: 20 ultra-bright LEDs

7. Service life: Semi-permanent battery, service life 5-7 years.

8. Operating environment: -30℃～+75℃. Waterproof rating: IP67.

9. Product material: Base is thickened steel plate, surface powder coated for rust prevention, Fresnel lens lampshade PC

10. Dimensions: Length 380mm × Width 210mm × Height 350mm. Lampshade diameter 173.25MM

11. Installation dimensions: 200mm (base diameter), 175mm (hole diameter) cloth 4 × diameter 10mm threaded holes

12. Product packaging: 390*220*360MM, net weight 4.5KG, gross weight 5.5KG

13. Visible distance: Approximately 5 kilometers

● The light must be installed in a place that receives sufficient sunlight to ensure continuous operation.

● Install the light on a horizontal surface. The mounting surface should be flat and have sufficient mechanical strength. Secure it using 4 M10 screws.

● For the first use, turn on the side button switch. Turn off this switch for long-term storage.

● This light has a light control function. The light starts working when the ambient illuminance is below the light control switch value.

● Because the light has a photoelectric switch function, the aviation light will not light up when the ambient light is high. When testing, the aviation light should be placed in a dark environment.

● Turn off the switch when storing the light.

● If the light is stored for more than 6 months, place the product in sunlight and turn on the button switch to charge the battery for 3 sunny days. (When the switch is off, it is normal to see a faint light emission from the product).

● This product has a sealed structure. Non-professional repair personnel should not disassemble the lampshade. The battery compartment at the bottom is detachable for easy battery replacement.