Round solar pearl plastic stud SRD-603
Paste-type solar road studs Model: SRD-603 Specifications: Dia114*24.5mm Material: Vibration-resistant PC+glue Introduction: This product is a round plastic PC shell solar deck light, using an intelligent light control system: it charges during the day and automatically turns on at night. The product also features a long working time, waterproof and pressure-resistant, no wiring required, easy installation, and double-sided or four-sided light emission.
Keywords:
SROADA
Working principle of solar lights
Solar deck lights are a high-tech solar photovoltaic product. The product utilizes the photovoltaic effect of solar energy to convert solar energy into electricity, and then stores the electricity in the battery through the control system. It automatically lights up at night and in rainy or foggy weather when there is insufficient sunlight, achieving landscape lighting and decoration effects.
Application Scenarios
Solar deck lights are widely used in roads, paths, decks, docks, driveways, gardens, walkways, boardwalks, backyards, etc. These lights can be quickly installed on any surface that can directly absorb sunlight. No wiring is required; they can be installed directly using screws or glue.
Product Parameters |
1. Power supply: Solar panel (monocrystalline silicon) 2.5V/120mA
2. Energy storage device: Ni-MH 1.2V/600mAh
3. Working time: Under standard light intensity, after charging for one day, flashing lights can continuously work for 24 hours, and constant lights for 12 hours; fully charged constant light for 48 hours, flashing lights can work for more than 72 hours
4. Display mode: Flashing or constant light
5. Display color: White, yellow, red, green, blue optional
6. Display device: 6pcs 5MM ultra-high brightness LEDs
7. Visible distance: Approximately 500 meters
8. Service life: Approximately 3-5 years
9. Operating environment: -20℃～+60℃
10. Shell material: Bulletproof and shockproof PC + epoxy
11. Dimensions: Diameter 114*H24.5mm, single weight approximately 260g
12. Waterproof rating: IP68
13. Packaging size: 38*29.5*25CM; 60PCS/carton, net weight: 15.6KG/carton, gross weight: 17KG/carton
Product Installation Method |
1. Positioning: First, set up safety warning facilities. Use a ruler to determine the installation location, ensuring that each position is vertically aligned, the installation distance is in accordance with design requirements, the installation area is flat, dry, and clean (such as sand, dust, marking paint, etc., if there are markings, clean the markings at the installation location), and there are no gaps (fill gaps with glue if any).
2. Mixing glue: Use dedicated A glue and dedicated B glue for studs, with a ratio of 1:1 (e.g., 1 kg of A glue and 1 kg of B glue). The glue must be mixed thoroughly until the color is consistent.
3. Gluing: When installing, clean the road surface. Use an appropriate amount of glue, ensuring that the stud is firmly attached to the ground without excessive overflow. Approximately 50 grams of glue is needed for each stud. Apply the glue evenly to the bottom of the road marker, place it on the ground, rotate the LED lamp reflector to face the oncoming traffic, and then gently tap the top of the stud with a rubber hammer to make it flat.
4. Inspection: Check the installed studs after two hours.
5. Road closure: It is recommended to close the road for 6 hours to ensure the glue curing time.
Product Installation Application Diagram |
SRD-312 Solar Landscape Light Installation Case
SRD-312 Solar Landscape Light Installation Case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD801 warning light installation case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD-306 lamp installation case in Singapore
Product Center
PRODUCTS CENTER
Recommended
Information
Contact Us
Company Address: Building D, 4F, Gem Science and Technology Park, Gemstone Road, Shiyan Street, Bao'an District, Shenzhen
Working principle of solar lights
Solar deck lights are a high-tech solar photovoltaic product. The product utilizes the photovoltaic effect of solar energy to convert solar energy into electricity, and then stores the electricity in the battery through the control system. It automatically lights up at night and in rainy or foggy weather when there is insufficient sunlight, achieving landscape lighting and decoration effects.
Application Scenarios
Solar deck lights are widely used in roads, paths, decks, docks, driveways, gardens, walkways, boardwalks, backyards, etc. These lights can be quickly installed on any surface that can directly absorb sunlight. No wiring is required; they can be installed directly using screws or glue.
Product Parameters |
1. Power supply: Solar panel (monocrystalline silicon) 2.5V/120mA
2. Energy storage device: Ni-MH 1.2V/600mAh
3. Working time: Under standard light intensity, after charging for one day, flashing lights can continuously work for 24 hours, and constant lights for 12 hours; fully charged constant light for 48 hours, flashing lights can work for more than 72 hours
4. Display mode: Flashing or constant light
5. Display color: White, yellow, red, green, blue optional
6. Display device: 6pcs 5MM ultra-high brightness LEDs
7. Visible distance: Approximately 500 meters
8. Service life: Approximately 3-5 years
9. Operating environment: -20℃～+60℃
10. Shell material: Bulletproof and shockproof PC + epoxy
11. Dimensions: Diameter 114*H24.5mm, single weight approximately 260g
12. Waterproof rating: IP68
13. Packaging size: 38*29.5*25CM; 60PCS/carton, net weight: 15.6KG/carton, gross weight: 17KG/carton
Product Installation Method |
1. Positioning: First, set up safety warning facilities. Use a ruler to determine the installation location, ensuring that each position is vertically aligned, the installation distance is in accordance with design requirements, the installation area is flat, dry, and clean (such as sand, dust, marking paint, etc., if there are markings, clean the markings at the installation location), and there are no gaps (fill gaps with glue if any).
2. Mixing glue: Use dedicated A glue and dedicated B glue for studs, with a ratio of 1:1 (e.g., 1 kg of A glue and 1 kg of B glue). The glue must be mixed thoroughly until the color is consistent.
3. Gluing: When installing, clean the road surface. Use an appropriate amount of glue, ensuring that the stud is firmly attached to the ground without excessive overflow. Approximately 50 grams of glue is needed for each stud. Apply the glue evenly to the bottom of the road marker, place it on the ground, rotate the LED lamp reflector to face the oncoming traffic, and then gently tap the top of the stud with a rubber hammer to make it flat.
4. Inspection: Check the installed studs after two hours.
5. Road closure: It is recommended to close the road for 6 hours to ensure the glue curing time.
Product Installation Application Diagram |
SRD-312 Solar Landscape Light Installation Case
SRD-312 Solar Landscape Light Installation Case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD801 warning light installation case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD-306 lamp installation case in Singapore
Leave a Message
If you are interested in our products and want to learn more, please leave a message here, and we will reply to you as soon as possible.
Company Address: Building D, 4F, Gem Science and Technology Park, Gemstone Road, Shiyan Street, Bao'an District, Shenzhen
Cooperation Consultation:
Mr. Zhong
Mr. Zhong
WhatsApp：8613530665818
Skype：Support@sroada.com
Mr. Zhong：+86 13530665818
Mr. Zhong：+86 18675508970
Business1：Sales01@sroada.com
Business 2：Sales02@sroada.com
Support：Support@sroada.com
QQ：691351563