143*47mm buried solar road stud SRD-626
Cast aluminum embedded solar road studs Model: SRD-626 Specifications: D143*H47mm Material: Die-cast aluminum housing + imported transparent PC Description: After installation, it can be pressed, statically withstands about 60 tons, and is parallel to the ground. It can be used in road center lines or pedestrian crosswalks, etc. Solar power supply does not require laying ground wires, and the inner core can be quickly replaced during maintenance; It can be used in road center lines or pedestrian crosswalks, statically withstands about 60 tons, and the inner core can be quickly replaced during maintenance. The road outlines the contour of the road to guide drivers in the correct driving direction
Keywords:
SROADA
Embedded Solar Road Stud 143*47MM SRD-626 Product Brief Instruction
I. Overview ： This product is an upgraded embedded solar road stud light, laid along road markings, It utilizes the photovoltaic effect of solar energy to convert solar energy into electricity, and then stores the electricity in the battery through a control system. It actively emits light at night and in rainy and foggy weather with insufficient sunlight, outlining the road contours, effectively guiding vehicles in the correct direction, and improving traffic safety. It also serves as a warning reminder and landscape lighting.
II. Advantages and Features ：
This product is a buried solar road stud light. Diameter 143* Height 47MM ，cast aluminum shell, PC mask, the product core is replaceable, static pressure resistance is about 25 ton. It can be installed on sidewalks ，highway center lines, etc. Because it is basically parallel to the ground after installation, it is very safe for passing vehicles, and it can effectively disperse the stress on the product, thus greatly extending the service life of the product. After installing this product, at night 500m within the range of about LED light emitted by the product, the luminous contour line formed is very clear and bright, thus effectively guiding vehicles, improving safety factor, greatly reducing the incidence of traffic accidents, and bringing a safe journey!
Energy saving: Using solar energy conversion to electricity, combined with high-efficiency LED light source, achieving energy saving. Environmental protection: No pollution, no radiation, no greenhouse gas emissions, achieving energy saving and emission reduction. Safety: Low voltage, no electric shock, fire and other accidents. Convenience: Easy installation, no need for wiring, burying lines and digging. Low investment: One-time investment, long-term benefits
III. Application scenarios: Can be used in the middle of the highway, with a pressure resistance of up to 30 ton
1 ，on four-lane roads, but the edge stones on roads without center dividers and insufficient light at night; 2 ，crossroads / zebra crossings (speed reduction warning); 3 ，sharp turns; 4 ，foggy areas (seaside, airport roads); 5 ，highways and roads without streetlights; 6、 guide lines at the entrance and exit of overpasses and tunnels; 7 ，road islands, vehicle diversion areas (around the triangle horizontal lines); 8 ，railway ramps; 9 ，on toll station lanes; 10 ，accident-prone areas; 11 ，city sidewalks, park paths and other areas that need to beautify the night scene, road surfaces.
IV. Parameters, Pictures:
1 Power supply: Solar panel (monocrystalline silicon): 0.6W
2 Energy storage device: Lithium iron phosphate battery 3.2V1500mAh
3 Working time: One day of charging can continuously work for more than 72 hours, a full charge can continuously work for about 150 hours
4 Display mode: Constant on or flashing
5 Display color: White, yellow, red, green, blue, five colors are optional.
6 Display device: 10MM Ultra-high brightness LED 6PCS
7 Visible distance: > 800 m
8 Service life: Lithium iron phosphate battery 5~7 years
9 Working environment: -20℃ ～ +80℃
10 Shell material: Die-cast aluminum shell +PC Thickened anti-slip and anti-aging
11 Dimensions: Diameter 143 × H47mm ，single net weight about 1.06KG
12 Pressure resistance: Static pressure resistance about 60 ton, waterproof grade: core IP68
13 Packaging size: 46*30*21CM ，18PCS/ box, net weight :18KG, Gross weight :19.6KG/ box
VI. Installation scene diagram:
VII. This product maintenance can replace the core
During product maintenance, the screws can be unscrewed to replace the core, which is convenient and fast for construction.
SRD-312 Solar Landscape Light Installation Case
SRD-312 Solar Landscape Light Installation Case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD801 warning light installation case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD-306 lamp installation case in Singapore
Product Center
PRODUCTS CENTER
Recommended
Information
Contact Us
Company Address: Building D, 4F, Gem Science and Technology Park, Gemstone Road, Shiyan Street, Bao'an District, Shenzhen
Embedded Solar Road Stud 143*47MM SRD-626 Product Brief Instruction
I. Overview ： This product is an upgraded embedded solar road stud light, laid along road markings, It utilizes the photovoltaic effect of solar energy to convert solar energy into electricity, and then stores the electricity in the battery through a control system. It actively emits light at night and in rainy and foggy weather with insufficient sunlight, outlining the road contours, effectively guiding vehicles in the correct direction, and improving traffic safety. It also serves as a warning reminder and landscape lighting.
II. Advantages and Features ：
This product is a buried solar road stud light. Diameter 143* Height 47MM ，cast aluminum shell, PC mask, the product core is replaceable, static pressure resistance is about 25 ton. It can be installed on sidewalks ，highway center lines, etc. Because it is basically parallel to the ground after installation, it is very safe for passing vehicles, and it can effectively disperse the stress on the product, thus greatly extending the service life of the product. After installing this product, at night 500m within the range of about LED light emitted by the product, the luminous contour line formed is very clear and bright, thus effectively guiding vehicles, improving safety factor, greatly reducing the incidence of traffic accidents, and bringing a safe journey!
Energy saving: Using solar energy conversion to electricity, combined with high-efficiency LED light source, achieving energy saving. Environmental protection: No pollution, no radiation, no greenhouse gas emissions, achieving energy saving and emission reduction. Safety: Low voltage, no electric shock, fire and other accidents. Convenience: Easy installation, no need for wiring, burying lines and digging. Low investment: One-time investment, long-term benefits
III. Application scenarios: Can be used in the middle of the highway, with a pressure resistance of up to 30 ton
1 ，on four-lane roads, but the edge stones on roads without center dividers and insufficient light at night; 2 ，crossroads / zebra crossings (speed reduction warning); 3 ，sharp turns; 4 ，foggy areas (seaside, airport roads); 5 ，highways and roads without streetlights; 6、 guide lines at the entrance and exit of overpasses and tunnels; 7 ，road islands, vehicle diversion areas (around the triangle horizontal lines); 8 ，railway ramps; 9 ，on toll station lanes; 10 ，accident-prone areas; 11 ，city sidewalks, park paths and other areas that need to beautify the night scene, road surfaces.
IV. Parameters, Pictures:
1 Power supply: Solar panel (monocrystalline silicon): 0.6W
2 Energy storage device: Lithium iron phosphate battery 3.2V1500mAh
3 Working time: One day of charging can continuously work for more than 72 hours, a full charge can continuously work for about 150 hours
4 Display mode: Constant on or flashing
5 Display color: White, yellow, red, green, blue, five colors are optional.
6 Display device: 10MM Ultra-high brightness LED 6PCS
7 Visible distance: > 800 m
8 Service life: Lithium iron phosphate battery 5~7 years
9 Working environment: -20℃ ～ +80℃
10 Shell material: Die-cast aluminum shell +PC Thickened anti-slip and anti-aging
11 Dimensions: Diameter 143 × H47mm ，single net weight about 1.06KG
12 Pressure resistance: Static pressure resistance about 60 ton, waterproof grade: core IP68
13 Packaging size: 46*30*21CM ，18PCS/ box, net weight :18KG, Gross weight :19.6KG/ box
VI. Installation scene diagram:
VII. This product maintenance can replace the core
During product maintenance, the screws can be unscrewed to replace the core, which is convenient and fast for construction.
SRD-312 Solar Landscape Light Installation Case
SRD-312 Solar Landscape Light Installation Case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD801 warning light installation case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD-306 lamp installation case in Singapore
Leave a Message
If you are interested in our products and want to learn more, please leave a message here, and we will reply to you as soon as possible.
Company Address: Building D, 4F, Gem Science and Technology Park, Gemstone Road, Shiyan Street, Bao'an District, Shenzhen
Cooperation Consultation:
Mr. Zhong
Mr. Zhong
WhatsApp：8613530665818
Skype：Support@sroada.com
Mr. Zhong：+86 13530665818
Mr. Zhong：+86 18675508970
Business1：Sales01@sroada.com
Business 2：Sales02@sroada.com
Support：Support@sroada.com
QQ：691351563