GPS synchronized flashing solar buried lamp SRD-626-1
Cast aluminum embedded solar road studs Model: SRD-626-1 Specifications: D143*H47mm Material: Die-cast aluminum housing + imported transparent PC Brief introduction: After installation, it can be driven over, with a static compressive strength of about 60 tons. It is parallel to the ground and can be used for solar power supply in road center lines or pedestrian crosswalks, etc., without the need for laying ground wires. The inner core can be quickly replaced during maintenance; Can be used in road center lines or pedestrian crosswalks, with a static compressive strength of about 60 tons. The inner core can be quickly replaced during maintenance. The road markings delineate the road contours to guide drivers in the correct direction.
Keywords:
SROADA
Product Working Principle
This product utilizes the photovoltaic effect of solar energy to convert solar energy into electricity. The control system then stores this electricity in a battery. When sunlight weakens in the evening or during cloudy/rainy days, the control system automatically activates the LED lights, achieving landscape lighting and decorative effects.
Product Advantages and Features
This product is a recessed solar road stud light, with a diameter of 143mm and a height of 47mm. It features a cast aluminum shell and a PC lens. The product's core is replaceable, and it can statically withstand approximately 25 tons of pressure. It can be installed on sidewalks and highway center lines. Because it is essentially parallel to the ground after installation, it is very safe for passing vehicles. It effectively disperses the force on the product, thus greatly extending its service life. After installation, the LED light emitted by the product can be clearly seen within a range of about 500m at night, forming a very clear and bright luminous outline, effectively guiding vehicles, improving safety, significantly reducing the incidence of traffic accidents, and ensuring safe travel!
Energy-saving: Utilizing solar energy conversion to electricity, combined with high-efficiency LED light sources, achieves energy saving. Environmentally friendly: No pollution, no radiation, no greenhouse gas emissions, achieving energy conservation and emission reduction. Safe: Low voltage, no electric shock, fire, or other accidents. Convenient: Easy installation, no need for wiring or underground construction. Low investment: One-time investment, long-term benefits.
Application Scenarios: Can be used in the middle of highways, withstanding up to 30 tons of pressure.
1. Road curbs on four-lane roads where there is no center divider and insufficient nighttime lighting; 2. Crosswalks/zebra crossings (speed reduction and warning prompts); 3. Sharp turns; 4. Foggy areas (seaside, airport roads); 5. Road curbs on highways and roads without streetlights; 6. Guide lines at the entrances and exits of overpasses and tunnels; 7. Road islands, vehicle diversion areas (around triangular areas); 8. Railway ramps; 9. On toll booth lanes; 10. Accident-prone areas; 11. City sidewalks, park paths, and other areas requiring nighttime beautification.
Product Parameters |
1. Power Supply: Solar panel (monocrystalline silicon): 5V 120mA
2. Energy Storage Device: Lithium iron phosphate battery 3.2V/1500mAh
3. Working Time: One day of charging allows for approximately 36 hours of continuous operation; a full charge allows for approximately 150 hours of continuous operation.
4. Display Mode: Constant on or flashing
5. Display Color: White, yellow, red, green, and blue are available.
6. Display Device: 10MM ultra-high brightness LED 6PCS
7. Visible Distance: Approximately 800 meters
8. Service Life: Nickel-hydrogen battery 3-5 years, lithium battery 5-7 years
9. Operating Environment: -20℃～+65℃
10. Shell Material: Die-cast aluminum shell + thickened PC anti-slip and anti-aging material
11. Dimensions: Diameter 143 × H47mm, single unit net weight approximately 1.06KG
12. Pressure Resistance: Static pressure resistance of approximately 60 tons, waterproof rating: IP68 core
13. Packaging Dimensions: 46*30*21CM, 18PCS/carton, net weight: 18KG, gross weight: 19.6KG/carton
Product Dimensions |
 |
 |
 |
 |
Product Installation Application Diagram |
Installation Scenarios:
This product allows for core replacement maintenance.
During product maintenance, the core can be quickly replaced by unscrewing the screws.
After-sales Service:
This product comes with a one-year free warranty. Damage caused by human factors, natural disasters, traffic accidents, etc., is not covered by the free warranty. Paid repair or firmware replacement of product parts is available after one year.
Troubleshooting:
|
Mal func tion Phenomena |
Solution Decision Square Law |
|
The light is not on |
It may be that the battery is dead. Place it in the sun to charge it. |
X. Precautions:
- Regularly clean the dust and dirt from the solar panel to ensure good charging effect.
- During storage, the product should be placed in the sun to charge the internal battery every 2-3 months.
- Non-professional technicians are strictly prohibited from disassembling the product, otherwise the warranty will be void.
- This "Instruction Manual" shall be implemented from May 1, 2022. Our company reserves the right to modify the "Instruction Manual". When the new version of the "Instruction Manual" is used, the old version will automatically become invalid without further notice.
SRD-312 Solar Landscape Light Installation Case
SRD-312 Solar Landscape Light Installation Case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD801 warning light installation case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD-306 lamp installation case in Singapore
Product Center
PRODUCTS CENTER
Recommended
Information
Contact Us
Company Address: Building D, 4F, Gem Science and Technology Park, Gemstone Road, Shiyan Street, Bao'an District, Shenzhen
Product Working Principle
This product utilizes the photovoltaic effect of solar energy to convert solar energy into electricity. The control system then stores this electricity in a battery. When sunlight weakens in the evening or during cloudy/rainy days, the control system automatically activates the LED lights, achieving landscape lighting and decorative effects.
Product Advantages and Features
This product is a recessed solar road stud light, with a diameter of 143mm and a height of 47mm. It features a cast aluminum shell and a PC lens. The product's core is replaceable, and it can statically withstand approximately 25 tons of pressure. It can be installed on sidewalks and highway center lines. Because it is essentially parallel to the ground after installation, it is very safe for passing vehicles. It effectively disperses the force on the product, thus greatly extending its service life. After installation, the LED light emitted by the product can be clearly seen within a range of about 500m at night, forming a very clear and bright luminous outline, effectively guiding vehicles, improving safety, significantly reducing the incidence of traffic accidents, and ensuring safe travel!
Energy-saving: Utilizing solar energy conversion to electricity, combined with high-efficiency LED light sources, achieves energy saving. Environmentally friendly: No pollution, no radiation, no greenhouse gas emissions, achieving energy conservation and emission reduction. Safe: Low voltage, no electric shock, fire, or other accidents. Convenient: Easy installation, no need for wiring or underground construction. Low investment: One-time investment, long-term benefits.
Application Scenarios: Can be used in the middle of highways, withstanding up to 30 tons of pressure.
1. Road curbs on four-lane roads where there is no center divider and insufficient nighttime lighting; 2. Crosswalks/zebra crossings (speed reduction and warning prompts); 3. Sharp turns; 4. Foggy areas (seaside, airport roads); 5. Road curbs on highways and roads without streetlights; 6. Guide lines at the entrances and exits of overpasses and tunnels; 7. Road islands, vehicle diversion areas (around triangular areas); 8. Railway ramps; 9. On toll booth lanes; 10. Accident-prone areas; 11. City sidewalks, park paths, and other areas requiring nighttime beautification.
Product Parameters |
1. Power Supply: Solar panel (monocrystalline silicon): 5V 120mA
2. Energy Storage Device: Lithium iron phosphate battery 3.2V/1500mAh
3. Working Time: One day of charging allows for approximately 36 hours of continuous operation; a full charge allows for approximately 150 hours of continuous operation.
4. Display Mode: Constant on or flashing
5. Display Color: White, yellow, red, green, and blue are available.
6. Display Device: 10MM ultra-high brightness LED 6PCS
7. Visible Distance: Approximately 800 meters
8. Service Life: Nickel-hydrogen battery 3-5 years, lithium battery 5-7 years
9. Operating Environment: -20℃～+65℃
10. Shell Material: Die-cast aluminum shell + thickened PC anti-slip and anti-aging material
11. Dimensions: Diameter 143 × H47mm, single unit net weight approximately 1.06KG
12. Pressure Resistance: Static pressure resistance of approximately 60 tons, waterproof rating: IP68 core
13. Packaging Dimensions: 46*30*21CM, 18PCS/carton, net weight: 18KG, gross weight: 19.6KG/carton
Product Dimensions |
|
|
|
|
Product Installation Application Diagram |
Installation Scenarios:
This product allows for core replacement maintenance.
During product maintenance, the core can be quickly replaced by unscrewing the screws.
After-sales Service:
This product comes with a one-year free warranty. Damage caused by human factors, natural disasters, traffic accidents, etc., is not covered by the free warranty. Paid repair or firmware replacement of product parts is available after one year.
Troubleshooting:
|
Mal func tion Phenomena |
Solution Decision Square Law |
|
The light is not on |
It may be that the battery is dead. Place it in the sun to charge it. |
X. Precautions:
- Regularly clean the dust and dirt from the solar panel to ensure good charging effect.
- During storage, the product should be placed in the sun to charge the internal battery every 2-3 months.
- Non-professional technicians are strictly prohibited from disassembling the product, otherwise the warranty will be void.
- This "Instruction Manual" shall be implemented from May 1, 2022. Our company reserves the right to modify the "Instruction Manual". When the new version of the "Instruction Manual" is used, the old version will automatically become invalid without further notice.
SRD-312 Solar Landscape Light Installation Case
SRD-312 Solar Landscape Light Installation Case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD801 warning light installation case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD-306 lamp installation case in Singapore
Leave a Message
If you are interested in our products and want to learn more, please leave a message here, and we will reply to you as soon as possible.
Company Address: Building D, 4F, Gem Science and Technology Park, Gemstone Road, Shiyan Street, Bao'an District, Shenzhen
Cooperation Consultation:
Mr. Zhong
Mr. Zhong
WhatsApp：8613530665818
Skype：Support@sroada.com
Mr. Zhong：+86 13530665818
Mr. Zhong：+86 18675508970
Business1：Sales01@sroada.com
Business 2：Sales02@sroada.com
Support：Support@sroada.com
QQ：691351563