The product uses maintenance-free lead-acid batteries, and the controller has overcharge and over-discharge protection circuits to maximize battery protection. The product features no need for external power supply, no wiring, simple and convenient installation, and no pollution. It is especially suitable for school entrances, railway crossings, village entrances located on highways, and remote locations with heavy traffic, inconvenient power supply, and a high risk of traffic accidents, particularly at non-fully enclosed high-grade highway level crossings and crosswalks. It warns vehicles to control speed and ensure safe driving to avoid traffic accidents. It can be used independently or as part of a traffic safety control system. After the battery is fully charged, it can be used continuously for 7-10 days during continuous rainy days.

1. Light Source: The light source uses a φ5mm four-element ultra-high brightness light-emitting diode (LED) with a lifespan ≥90,000 hours.

2. LED Angle: The light-emitting diode angle is greater than 25 degrees!

3. The solar yellow flashing light uses a monocrystalline silicon solar panel. When the battery is fully charged, it can work continuously for more than 120 hours.

4. Light Transmission Design: The outer surface of the light transmission lens adopts an inclined surface design to prevent dust accumulation on the light transmission lens.

5. Appearance Design: The appearance is specially designed for LED light sources, with an ultra-thin structure. The lamp thickness (for φ300mm light-transmitting surface lamps is 150mm).

6. Shell Material: The shell is made of polycarbonate (PC) material by one-time injection molding, and the sealing uses silicone rubber seals. It is dustproof, waterproof, flame-retardant, and anti-aging. The lamp shell has a lifespan ≥9 years.

7. The solar yellow flashing warning light uses solar cells to provide energy, without the need for a 200V power supply. It is simple and convenient to install, saving labor and time, and is immediately visible after installation.

8. The solar cell component has a 15-year quality guarantee period. The battery power generation system is resistant to wind, hail, and ultraviolet radiation. The system can operate normally in an environment from -20℃ to +65℃, unaffected by geographical environment.

9. This lamp requires no maintenance.

Suitable for installation at intersections with high pedestrian and vehicle traffic in highways or cities, railway crossings, obstacles, accident-prone sections, etc. It can warn vehicles to slow down and ensure pedestrian safety, effectively reducing traffic accidents, and is an essential product in traffic control systems.

1. Solar Panel: 18V 8W monocrystalline silicon, lifespan >10 years

2. Battery: Maintenance-free lead-acid battery 12V/7AH, lifespan >3 years

3. LED: Ultra-high brightness yellow LED, visible distance >1000 meters

4. Controller: Light control, can control all-day flashing, flashing at night

5. Flashing Frequency: 60 times/minute, customizable according to customer requirements

6. Working Time: 8 hours of charging under sufficient sunlight can work for 72 hours

7. Working environment: -30℃ to +65℃, can work normally, continuous rainy weather work >200H (depending on the flashing mode)

8. Protection Level: IP65

9. Weight: 7KG

10. Flashing Diameter: 300MM diameter

11. Product Dimensions: 350*350*150MM

12. Product Packaging Dimensions: 400*300*480MM

(1) The solar yellow flashing light comes with installation accessories.

(2) During installation, the direction of the lamp box should be facing the oncoming traffic 100m away from the center of the lane, and installed vertically to the ground.

(3) When installing the dust and sunshade cover, directly align the sunshade cover with the lamp body and fasten it.

(4) During installation, drill the holes for connecting the pole and the lamp box (the distance between the centers of the two inner holes of the lamp box bracket is 50mm, and the distance between the centers of the two outer holes is 190mm), and then use M12*100 screws (provided) to tighten and fix the rear bracket of the lamp box to the pole.

(5) When installing the solar panel, insert the solar bracket directly into the 1-shaped hole on the top of the lamp body, adjust the direction of the solar panel, and tighten the screws up and down.

(6) The installation height is determined by the customer, and the pole needs to be provided by the customer.