123*48mm solar-powered buried road stud light SRD-612
Cast Aluminum Recessed Solar Road Stud Model: SRD-612 Specifications: D123*H48mm Material: Die-cast aluminum housing + imported transparent PC Introduction: After installation, it can withstand vehicle pressure, static pressure of about 30 tons, and is parallel to the ground. It can be used for road center lines or pedestrian crosswalks, etc. Solar powered, no need to lay ground wires, and the inner core can be quickly replaced during maintenance.
Keywords:
SROADA
Working principle of solar lights
This product, the SRD-612 embedded solar road stud light, utilizes the photovoltaic effect of solar energy to convert solar energy into electricity. The control system then stores this electricity in a battery. At night and in rainy or foggy weather with insufficient sunlight, it automatically illuminates, effectively guiding vehicles in the correct direction, ensuring traffic safety and providing landscape lighting.
Advantages and Features
Energy-saving: Utilizing solar energy conversion to electricity, combined with high-efficiency LED light sources, achieves energy saving. Environmentally friendly: No pollution, no radiation, no greenhouse gas emissions, achieving energy saving and carbon reduction. Safe: Low voltage, no electric shock, fire, or other accidents. Convenient: Easy installation, no wiring, burying, or digging required.
Low investment: One-time investment, long-term benefits
Application scenarios: Can be used in the middle of highways, withstanding up to 35 tons of pressure
1. Road edges with four or more lanes in both directions, but without a central divider and insufficient nighttime lighting;
2. Intersections/crosswalks (speed reduction prompts);
3. Sharp turns;
4. Foggy areas (seaside, airport roads);
5. Road edges of highways and roads without streetlights;
6. Guide line positions at the entrances and exits of overpasses and tunnels;
7. Road islands, vehicle diversion areas (around the perimeter of triangular areas);
8. Railway ramps;
9. Toll booth lanes
10. Accident-prone areas;
11. City sidewalks, park paths, and other areas requiring nighttime beautification.
Product Parameters |
1. Power supply: Solar panel (monocrystalline silicon): Maximum power 0.45W
2. Energy storage device: Lithium iron phosphate battery 3.2V 1000mAh
3. Working time: Under standard light intensity, charging for one day allows for continuous operation for approximately 24 hours; a full charge allows for approximately 90 hours of operation
4. Display mode: Flashing or constant light selectable.
5. Display color: White, yellow, red, green, and blue are selectable.
6. Display device: Ultra-bright LED 6PCS
7. Visible distance: >500 meters
8. Service life: 5-7 years for lithium iron phosphate battery type
9. Operating environment: -25℃～+70℃
10. Housing material: Die-cast aluminum + polycarbonate
11. Dimensions: Diameter 123 * H48mm, hole size 127MM, weight 0.78KG
12. Compressive strength: Static compressive strength approximately 35 tons, waterproof rating: IP68
13. Packaging size: 41*28*24CM, 24PCS/carton
Installation Method |
1. Set up safety warning facilities.
2. Drill a 127mm diameter hole, approximately 45mm deep, using a drill.(Mark the drill or add a ring to the drill bit to ensure the drilled hole has a certain depth)
3. Remove the asphalt in the center of the hole using a socket wrench.(If it is a cement road surface, use an electric breaker to break up the cement)
4. Blow away sand, soil, and water from the hole using high-pressure air.(Or use a sponge to dry the water; the water must be completely dry, otherwise it will not adhere properly)
5. Use a mold of fixed height to test whether the depth of the hole is appropriate.(Otherwise, it needs to be adjusted)
6. Place asphalt or epoxy resin into the hole, add an appropriate amount of small stones and make it smooth.(Asphalt hardens quickly, construction is fast, less impact on traffic, and low cost, suitable for highways, high traffic volume, or a large number of continuous installations. For smaller, sporadic projects, use epoxy resin)
7. Place the solar road stud light into the hole, rotate the LED beads to face oncoming traffic, and finally gently tap the top of the stud with a rubber hammer to make it flat and completely secure.
Product Installation Diagram |
SRD-312 Solar Landscape Light Installation Case
SRD-312 Solar Landscape Light Installation Case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD801 warning light installation case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD-306 lamp installation case in Singapore
Product Center
PRODUCTS CENTER
Recommended
Information
Contact Us
Company Address: Building D, 4F, Gem Science and Technology Park, Gemstone Road, Shiyan Street, Bao'an District, Shenzhen
Working principle of solar lights
This product, the SRD-612 embedded solar road stud light, utilizes the photovoltaic effect of solar energy to convert solar energy into electricity. The control system then stores this electricity in a battery. At night and in rainy or foggy weather with insufficient sunlight, it automatically illuminates, effectively guiding vehicles in the correct direction, ensuring traffic safety and providing landscape lighting.
Advantages and Features
Energy-saving: Utilizing solar energy conversion to electricity, combined with high-efficiency LED light sources, achieves energy saving. Environmentally friendly: No pollution, no radiation, no greenhouse gas emissions, achieving energy saving and carbon reduction. Safe: Low voltage, no electric shock, fire, or other accidents. Convenient: Easy installation, no wiring, burying, or digging required.
Low investment: One-time investment, long-term benefits
Application scenarios: Can be used in the middle of highways, withstanding up to 35 tons of pressure
1. Road edges with four or more lanes in both directions, but without a central divider and insufficient nighttime lighting;
2. Intersections/crosswalks (speed reduction prompts);
3. Sharp turns;
4. Foggy areas (seaside, airport roads);
5. Road edges of highways and roads without streetlights;
6. Guide line positions at the entrances and exits of overpasses and tunnels;
7. Road islands, vehicle diversion areas (around the perimeter of triangular areas);
8. Railway ramps;
9. Toll booth lanes
10. Accident-prone areas;
11. City sidewalks, park paths, and other areas requiring nighttime beautification.
Product Parameters |
1. Power supply: Solar panel (monocrystalline silicon): Maximum power 0.45W
2. Energy storage device: Lithium iron phosphate battery 3.2V 1000mAh
3. Working time: Under standard light intensity, charging for one day allows for continuous operation for approximately 24 hours; a full charge allows for approximately 90 hours of operation
4. Display mode: Flashing or constant light selectable.
5. Display color: White, yellow, red, green, and blue are selectable.
6. Display device: Ultra-bright LED 6PCS
7. Visible distance: >500 meters
8. Service life: 5-7 years for lithium iron phosphate battery type
9. Operating environment: -25℃～+70℃
10. Housing material: Die-cast aluminum + polycarbonate
11. Dimensions: Diameter 123 * H48mm, hole size 127MM, weight 0.78KG
12. Compressive strength: Static compressive strength approximately 35 tons, waterproof rating: IP68
13. Packaging size: 41*28*24CM, 24PCS/carton
Installation Method |
1. Set up safety warning facilities.
2. Drill a 127mm diameter hole, approximately 45mm deep, using a drill.(Mark the drill or add a ring to the drill bit to ensure the drilled hole has a certain depth)
3. Remove the asphalt in the center of the hole using a socket wrench.(If it is a cement road surface, use an electric breaker to break up the cement)
4. Blow away sand, soil, and water from the hole using high-pressure air.(Or use a sponge to dry the water; the water must be completely dry, otherwise it will not adhere properly)
5. Use a mold of fixed height to test whether the depth of the hole is appropriate.(Otherwise, it needs to be adjusted)
6. Place asphalt or epoxy resin into the hole, add an appropriate amount of small stones and make it smooth.(Asphalt hardens quickly, construction is fast, less impact on traffic, and low cost, suitable for highways, high traffic volume, or a large number of continuous installations. For smaller, sporadic projects, use epoxy resin)
7. Place the solar road stud light into the hole, rotate the LED beads to face oncoming traffic, and finally gently tap the top of the stud with a rubber hammer to make it flat and completely secure.
Product Installation Diagram |
SRD-312 Solar Landscape Light Installation Case
SRD-312 Solar Landscape Light Installation Case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD801 warning light installation case
SRD-305 Installation Case Study in Duyun City, Guizhou Province
SRD-306 lamp installation case in Singapore
Leave a Message
If you are interested in our products and want to learn more, please leave a message here, and we will reply to you as soon as possible.
Company Address: Building D, 4F, Gem Science and Technology Park, Gemstone Road, Shiyan Street, Bao'an District, Shenzhen
Cooperation Consultation:
Mr. Zhong
Mr. Zhong
WhatsApp：8613530665818
Skype：Support@sroada.com
Mr. Zhong：+86 13530665818
Mr. Zhong：+86 18675508970
Business1：Sales01@sroada.com
Business 2：Sales02@sroada.com
Support：Support@sroada.com
QQ：691351563